Shenzhen CXT Technology & Development Co., Ltd.
Add to Cart
Model: CXT-Z1701A-90
Specifications: 1500*1300*2300mm
Pole length: 570mm
Process: Produced by bending, cutting, welding, polishing, grinding and other processes
Material: National standard 304 stainless steel (can be customized 201 stainless steel, iron paint)
Cross turnstile - full-height cross turnstile
When the CXT-BT1701 full-height turnstile passes illegally or rushes through the gate, an alarm will be automatically issued. When the gate passes illegally or rushes through the gate, the gate bar will automatically rotate to the corresponding angle and then lock, realizing humanized injury prevention. When the external force disappears, it will automatically reset.
CXT-BT1701 full-height turnstile can be expanded:
1. Remote control and management through the management computer (command docking is required).
2. Counting function to realize the statistics of the number of people present.
3. Personalized voice prompt function to make the channel closer to life.
Full-height cross turnstile functional features:
1) It has fault self-checking and alarm prompting functions, which is convenient for user maintenance and use;
2) It has automatic opening when power is off, self-checking when incoming calls and automatically recovering to the locked state
3) There are multiple working modes to choose from, that is, two-way card reading, one side card reading and the other direction is prohibited, one side card reading and the other direction is free to pass, and the gate machine working mode can be set through the mainboard menu.
4) When a pedestrian reads a valid card and passes through, the infrared detects that the pedestrian has passed through and the gate is automatically closed or delayed after the pedestrian passes through. The delay of 1-60 seconds can be set by the mainboard menu.
5) It has an automatic reset function. When the passerby does not pass through within the specified time after reading a valid card, the system will automatically cancel the passerby's access rights for this time, and the restricted access time can be set by the management personnel.
6) It has a 485 remote control of gate opening and closing functions to meet the special needs of users and fire safety requirements.
7) Anti-collision function, when no gate opening signal is received, the swing arm automatically locks;
8) Mechanical anti-pinch function, when encountering resistance during the swing arm reset process, it automatically rebounds or the motor automatically stops working within the specified time, and the force is very small, and an alarm signal is issued at the same time;
9) It has a unified and standard external electrical interface, which can be connected with various reading and writing devices, which is convenient for system integration, and can be remotely controlled and managed through the management computer.
10) It can automatically count the number of people passing in the direction of passage and present it to the manager in an intuitive LED (optional) way, so that the manager can know the number of people passing in a certain direction.
11) It has a clear direction of passage indication function, and uses intuitive LED passers to indicate whether passage is allowed or prohibited.
12) It has card reading with memory and without memory function, and users can set it through the motherboard keyboard according to their needs.
13) Through software settings, the total number of people inside the venue can be limited to meet the special needs of some special occasions.
14) The whole system runs smoothly and has low noise;
Passage prompts, assist rotation. Run smoothly and without noise;
Free passage settings. Buffer, anti-collision, anti-reversal;
Single and two-way passage can be set arbitrarily;
It has fault self-detection and alarm prompt functions, which is convenient for users to use and maintain;
It is automatically open when power is off, and automatically detects and resets when power is on.