Shenzhen CXT Technology & Development Co., Ltd.
Add to Cart
| Model | CXT-Z1702A-90 |
| Specification | 2400*1450*2300mm |
| Rod length | 570mm |
| Process | Bending, cutting, welding, polishing, grinding and other processes |
| Material | National standard 304 stainless steel (201 stainless steel, iron paint can be customized) |
The Chuangxintong full-height turnstile has fault self-checking and alarm prompting functions, which is convenient for users to maintain and use;
The interface can be connected to an external switch button or remote control to achieve one-way or two-way control of passage;
The turnstile has an automatic reset function. When the gate bar is unlocked, it rotates 120 degrees/90 degrees, which means it is automatically reset (locked). Or if there is no passage within the specified time, the system will automatically cancel the user's permission to pass through the turnstile arm and automatically close (lock), and the delay is adjustable at 2S, 5S, 10S, and 60S.
Anti-collision function, when no gate opening signal is received, the fence bar is automatically locked;
Anti-tailgating function, when one person passes, it turns 120 degrees/90 degrees and automatically locks;
Power-off automatic normally open function to meet the requirements of fire management;
Can be connected with a variety of card reading devices to receive relay switch signals;
One-way and two-way passage functions, can control the entry and exit of personnel in one direction or two directions;
Adopting the optical working principle, there is no delay requirement for the input control signal, and absolutely avoids the phenomenon of swiping a card to pass through several people;
External buttons can realize left and right normally open functions;
External buttons can realize non-power-off normally open functions;
Remote control and management can be realized directly through the management computer (customization is required);
The control panel can be connected to the counting function to record the number of people present, and realize the forward addition and reverse subtraction functions (customization is required).
The turnstile is mainly divided into full-height turnstile, half-height turnstile, and then there are one-way turnstile, 90° turnstile, 120° turnstile, etc. Characteristics of turnstiles Turntiles are suitable for strictly controlled areas and can effectively prevent climbing and drilling. Mainly used in special places: prisons, railway stations, stations,
Full-height turnstiles are suitable for strictly controlled areas, which can effectively prevent climbing and drilling. When people pass through the turnstiles, the turnstiles controlled by management authority can refuse entry to people without authority. If the authority allows passage, the turnstiles will automatically release.
Full-height turnstiles are currently mainly used in places including: prisons, military management areas, banks, etc., and factories with very strict entry and exit management (such as chemical plants, construction sites, etc.). The mechanical part of the equipment contains an emergency control device. When the power is off, the center arm can rotate freely to ensure smooth passage; it meets fire protection requirements and automatically locks when the power is on. It can be applied to all building environments and can solve all control problems of pedestrian entrances and exits. It can control whether the gate is locked or unlocked at any time, with up to 20 signal interfaces, which is convenient for users to expand functions.